Yamaha WOLVERINE 2015 - Coolant

8-25
8
10. Install the front bottom panel by installing
the bolts as shown, and then tightening
them to the specified torque.
11. Install the remaining bolts as shown, and
then tightening them to the specified
torque.
EBU36091
Coolant
The coolant level should be checked before
each ride. In addition, the coolant must be
changed at the intervals specified in the peri-
odic maintenance and lubrication chart.
1. Front bottom panel
2. Bolt
Tightening torques:
Front bottom panel bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
2
2
1
1. Front bottom panel
2. Bolt
Tightening torques:
Front bottom panel bolt
9 Nm (0.9 m·kgf, 6.5 ft·lbf)
2
1
UBN57AE0.book Page 25 Tuesday, November 24, 2015 1:42 PM