Yamaha WOLVERINE 2015 - Headlight Beam Adjustment

8-59
8
7. Connect the headlight coupler.
8. Install the bulb cover and the cover at the
rear of the headlight. NOTICE: Make
sure the headlight bulb cover is se-
curely fitted over the bulb holder and
seated properly.
[ECB02210]
9. Adjust the headlight beam if necessary.
EBU32681
Headlight beam adjustment
NOTICE
ECB00691
It is advisable to have a Yamaha dealer
make this adjustment.
To raise the beam, turn the headlight beam
adjusting screw in direction (a).
To lower the beam, turn the headlight beam
adjusting screw in direction (b).
1. Do not touch the glass part of the bulb.
1
1. Headlight beam adjusting screw
1
(a)
(b)
UBN57AE0.book Page 59 Tuesday, November 24, 2015 1:42 PM