ELECTRICAL SPECIFICATIONS
2-9
EAM20130
ELECTRICAL SPECIFICATIONS
Voltage
System voltage 12 V
Ignition system
Ignition system TCI
Advancer type Digital
Ignition timing (B.T.D.C.) 10.0 2000 r/min
Engine control unit
Model B292
Ignition coil
Primary coil resistance 2.16–2.64
Secondary coil resistance 8.64–12.96 k
Spark plug cap
Resistance 7.50–12.50 k
Lean angle sensor output voltage
Operating angle 45
Output voltage up to operating angle 0.4–1.4 V
Output voltage over operating angle 3.7–4.4 V
Charging system
Charging system AC magneto
Standard output 14.0 V, 11.4 A at 5000 r/min
Stator coil resistance 0.528–0.792
Rectifier/regulator
Regulator type Three-phase
Regulated voltage (DC) 14.1–14.9 V
Rectifier capacity (DC) 23.0 A
Battery
Model YTZ7S(F)
Voltage, capacity 12 V, 6.0 Ah (10 HR)
Indicator light
Fuel level warning light 1.7 W
Engine trouble warning light 1.7 W
Starter motor
Power output 0.35 kW
Armature coil resistance 0.0189–0.0231
Brush overall length 7.0 mm (0.28 in)
Brush overall length limit 3.5 mm (0.14 in)
Brush spring force 3.92–5.88 N (400–600 gf, 14.11–21.17 oz)
Commutator diameter 17.6 mm (0.69 in)
Commutator diameter limit 16.6 mm (0.65 in)
Mica undercut (depth) 1.50 mm (0.06 in)
Fuel sender unit
Sender unit resistance (full) 1350.0–1900.0
Fuel injection sensor
Crankshaft position sensor resistance 228–342
Intake air temperature sensor resistance 5400–6600 at 0 C (5400–6600 at 32 F)