Yamaha YZ450F 2021 - Shift Pedal; Front Brake Lever; Rear Brake Pedal; Starter Knob

INSTRUMENT AND CONTROL FUNCTIONS
1-22
To change the mode
1. Shift to neutral.
2. Start the engine.
3. Press the mode switch.
TIP
As shipped from the factory, maps 1 and 2 are
the same. You must use the Power Tuner app to
adjust the map settings.
When the mode switch “1” is illuminated, map 2
is selected.
EAM30185
SHIFT PEDAL
The shift pedal “1” has adopted a method of 1
down & 4 ups (press-down & kick-ups).
Press it down for N (neutral) to 1st, and kick it up
for 2nd to 5th.
EAM30188
FRONT BRAKE LEVER
The front brake lever “1” is located on the right
handlebar. Pull it toward the handlebar to acti-
vate the front brake.
EAM30189
REAR BRAKE PEDAL
The rear brake pedal “1” is in the right of the
chassis. Press down on the brake pedal to acti-
vate the rear brake.
EAM30444
STARTER KNOB
Starting a cold engine requires a larger amount
of intake air, which is supplied by the starter
knob “1”.
Pushing the knob toward “a” turns ON the start-
er, resulting in a larger angle of throttle valve.
TIP
When operating the throttle grip in the closing di-
rection, the starter knob “1” moves in the direc-
tion “b” as shown and returns to its original
position.
WARNING
EWA20470
While handling the starter knob, take care
not to burn yourself on exhaust pipes.
1
1
1
1
1
1
2
2
3
3
4
4
5
5
N
N
1
1
1
1
a
a
b
b
1
1