INCLUDED PARTS
1-7
EAM20088
INCLUDED PARTS
EAM30190
SIDESTAND
This sidestand “1” is used to support only the
machine when standing or transporting it.
EWA20260
• Never apply additional force to the sides-
tand.
• Remove this sidestand before starting out.
EAM30005
NIPPLE WRENCH
The nipple wrench “1” is used to tighten the
spoke.
EAM30006
HANDLEBAR PROTECTOR
Install the handlebar protector “1” with the mark
“a” facing forward.
EAM30007
FUEL HOSE JOINT COVER
The fuel hose joint covers “1” are used to pre-
vent mud, dust, and other foreign materials from
entering the inside when the fuel hose is discon-
nected.
EAM30443
POWER TUNER
By downloading the Power Tuner app to your
smartphone and wirelessly connecting to the
CCU wireless network, you can adjust various
vehicle settings.
EWA20460
• Do not operate the engine in a closed area.
The exhaust gas is poisonous.
• Never let flames near the servicing area.
ECA26050
• This application is designed for adjusting
the settings on a standard vehicle. In case
the engine specifications (muffler, com-
pression ratio, etc.) have been changed,
the performance may not match to the actu-
al settings.
• Do not run the engine with the smartphone
carried with you. Otherwise, the smart-
phone could be damaged.
• Download the Power Tuner app from the
Google© or Apple© store.
• For details about handling the smartphone,
read the owner’s manual of the smartphone.
Before connecting to the CCU wireless net-
work (in case of initial use of the Power Tun-
er app)
1. Remove the bolts and side cover (left).
A
a
1
A
1
To Next Page
Loading...
