ST3000 Smart Transmitter Series 900 Electronic Differential Pressure/Pressure Transmitter 1
Safety
Instructions
Preface
Correct installation and periodic maintenance are essential to the safe use of your dif-
ferential pressure transmitters.
Read the safety instructions provided in this manual carefully and understand them
fully before starting installation, operation, and maintenance work.
Inspection
On delivery, make sure that the specifications are correct and check for any damage
that may have occurred during transportation. This equipment was tested under a strict
quality control program before shipment. If you find any problem in the quality speci-
fications, please contact your Yamatake Corporation representative immediately, pro-
viding the model name and serial number.
The name plate is mounted on the top of the enclosure.
Precautions
The following symbols are used in this manual to ensure user safety.
WARNING
This symbol is used to warn of hazards where failure to observe a safety instruction
may result in death or serious injury.
CAUTION
This symbol is used to warn of hazards where failure to observe a safety instruction
may result in injury or physical damage.
To ensure safe operation, be sure to observe the safety instructions provided on the
next page.
Yamatake Corporation will assume no responsibility, or offer any guarantee for any
failure resulting from violation of these safety instructions.
To Next Page
Loading...
Need help?
General
