(1)
Handling
of Cooling
Water
1)
Choose
LLC which will not have any adverse effects on the materials (cast iron, aluminum,
copper,
etc.) of the engine's fresh water cooling system.
2) Strictly use the proper mixing ratio of LLC to fresh water as instructed by the LLC maker.
3)
Replace
the cooling water periodically according to the maintenance schedule given in this
operation manual.
4)
Remove
the
scale
from the cooling water system periodically according to the instructions this
operation manual.
5) Strictly use the proper mixing ratio of LLC to fresh water as instructed by the LLC maker. If
incorrect ratio of LLC to fresh water is
used,
the cooling performance of the cooling water
will drop and the engine may become overheated.
6) Do not mix different types (brand) of
LLC,
chemical reactions may make the LLC
useless
and
engine trouble could result.
piNOTICE]
—
Excessive use of LLC also
lowers
the cooling
efficiency
of the
engine.
Be sure to use the
mixing
ratios
specified by the LLC
maker
for your
temperature
range.
-25-
To Next Page
Loading...
