EF494T OM
35
Starting
CAUTION
Do not start the engine if the position control lever is not
in the LOW position. The implement may abruptly raise
causing a damage or injury to the human and machine.
(1) Set the fuel filter and water separator to "O" to open
the fuel cock.
(A) Fuel cock open
(B) Fuel cock close
(2) Put the main and range shift levers, reverse lever
and PTO shift lever in the N position.
(3) Set the position control lever in LOW.
(4) Put the accelerator lever in the TOP position. Fully
depress the clutch pedal and turn the main switch to
START.
(5) After the engine has started, immediately release the
main switch.
IMPORTANT
* The engine cannot be started without putting both the
main and PTO shift levers in the N position.
To Next Page
Loading...
