Yanmar EF494T - Specifications

EF494T OM
74
SPECIFICATIONS
MODEL EF494T
Drive type 4-wheel Drive
Dimensions
Overall length (mm) 3,230
Overall width (mm) 1,605
Overall height (mm) 2,355
Wheelbase (mm) 1,830
Tread
Front (mm) 1,300, 1,466
Rear (mm) 1,270, 1,344
Ground clearance (mm) 375
Weight (kg) 1,540
Engine
Model 4TNV88
Type 4-cycle, water-cooled diesel
Output (SAE Gross) (HP/rpm) 49/2,800
Number of cylinders 4
Bore x Stroke (mm) 88 x 90
Displacement (cc) 2,189
Air cleaner Dry, dual element
Fuel tank capacity (liter) 40
Battery 12V-52AH
Steering Hydrostatic
Clutch Dry, single
Brake Mechanical, wet disc
Transmission
Type Collar shift
Gear shift (Forward x Reverse) F9 x R9
Forward speed (km/hr) 1.6-28.8
Reverses speed (km/hr) 1.7-29.7
Max. speed, forward (km/hr) 30.8
Tire
Front 8-18-6
Rear 13.6-26-8
Rear PTO
Type Transmission PTO
PTO shaft SAE1-3/8 inch (35mm), 6 spline
Speed (rpm) 568, 769 at rated engine speed
Hydraulic
Type Position control
Hitch 3 point hitch, category SAE #1
Draw bar hitch Clevis type
NOTE:
All technical data, measurement and weight are approximate, and the manufacturer has the right to make
alteration without prior notice.
TRACTOR MASS AND TIRE SPECIFICATION
TIRE SIZE
(Number of plies)
FRONT AXLE REAR AXLE
Maximum
working load of
tires
Technically
permissible mass
on each axle
Maximum
working load of
tires
Technically
permissible mass
on each axle
F: 8-18(6), R: 13.6-26(8)
kg 650 980 1,580 1,675
IMPORTANT
Set up the implement so that the front wheel load and the rear wheel load are not greater than the
smaller of the following: the permissible load capacity of the tires or the technically permissible
mass on each axle.