EF494T OM
43
DANGER
Do not drive the tractor if the wheel mounting bolts
or nuts are loose. If the tractor is driven with loose
nuts or bolts, there is a possibility that an accident
will occur.
Make daily and periodic wheel inspections to check
for loose nuts and bolts on the wheels. If they are
loose, retighten them to the specified torque.
When wheel tread width was changed, check the
bolts and nut tightening after the first 10 hours and
again after the 50 hours. If the bolts are loose,
retighten them. After that, check every 100 hours
operation.
Fastening torque (Front and rear)
Fixing bolts for wheel and axle shaft:
186 N-m (19 kgf-m)
FRONT TIRE: 8-18
REAR TIRE: 13.6-26
To Next Page
Loading...
