EasyManua.ls Logo

Yanmar EF494T - Page 62

Yanmar EF494T
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EF494T OM
57
Transmission oil
Check
Draw out the oil gauge on the rear part of the transmission
and check the oil level. The level should be between the
upper and lower limits. If insufficient, add the new oil to the
normal level. Also check for leaks.
(A) Oil supply port
(B) Oil gauge
Replacing oil
Remove the remaining oil through the drain plugs on the
bottom of the transmission case. Removal is easy if the
transmission case is warm. Add the new oil through the
supply port on the rear part.
Transmission oil is commonly used with hydraulic oil
and power steering oil.
Use Yanmar transmission fluid TF-500 or equivalent for
transmission oil.
(A) Drain plug
Cleaning transmission oil strainer
When replacing transmission oil, wash the oil strainer with
diesel fuel.
(A) Oil strainer
Equivalent to TF-500A
SUPPLIER BRAND NAME
Mobil Mobil Fluid 425, 424
Castrol Agricastrol MP, CASTROL UTF
Shell Tellus Oil 32 or 37, Donax TD
Ford ESN-M-2C-134A
Esso Torque Fluid 56
John Deere J20B, J14A
BP Tractran UTH

Table of Contents