Yard force LUV1000Ri - Mower Configuration Settings; Time Settings for Operation; Boundary Settings; Multi-Area Mowing Zones

12 13
MOWAP MOWAP
Time settings
Here you can set three different working times and select the day
when the mower should work. Also set Mower date and time
Multi-Area
Here you can define up to 4 different mowing areas.
(Function only for the Yardforce X80i, X100i, X150i, LUV1000Ri )
Rain sensor setting
Setting a delay when the mower should resume work after the rain
Boundary settings
- Trimming: edge cutting function on/ off
- Width: Set how far the mower is allowed to go beyond the
perimeter wire.
(Function only for the Yardforce LUV and X
series)
- Signal: Change from S1 to S2
GB