Yardistry YM12941Z - Installing Roofing Material; Roofing Material Handling Precautions

32 support@yardistrystructures.com
INSTALLING ROOFING MATERIAL
CAUTION!
Roong material may have sharp edges! Wear gloves!
HANDLE WITH CARE!
Place roong material on a non-abrasive surface before assembly as it
can bend, dent and scratch easily.
WARNING – DO NOT OVER TIGHTEN ROOFING SCREWS!
Over tightening screws will cause roong material to crush.
The roong screws can easily crush the Roof Panels and Roof
Edges when using a power drill. We recommend hand tightening the
roong screws so that they sit snug and tight to the roong material.
STOP STOPSTOP STOP
Overtightened and Crushed Snug and Tight
X