Yardistry YM12941Z - Page 50

50 support@yardistrystructures.com
A: At each corner place one Corner Cap tight to Fascia Assemblies, push up so the bottom is tight to the bottom
of the assemblies then attach with four #8 x 3/4” Sheet Metal Screws per Corner Cap. (g. 21.1 and 21.2)
Hardware
16 x #8 x 3/4” Sheet Metal Screw
Componets:
4 x Corner Cap
Corner
Cap
Fascia
Assembly
Fig. 21.1
Fig. 21.2
#8 x 3/4”
Sheet Metal
Screw
Large
Fascia
Assembly
Tight
x 3
Step 21: Attach Corner and Beam Caps
#8 x 3/4”
Sheet Metal
Screw