(5) Shaft Extension of Straight Shaft with Shaft Seal (6) Shaft Extension of Straight Shaft •
with Keyway and Shaft Seal
'1
SERVOMOTOR proper is the same dimensions as stan-
dard SERVOMOTOR in S series. See Par. 8.3 (1). SERVOMOTOR proper is the same dimensions as stan-
Details of shaft extension are shown below: dard SERVOMOTOR in S series. See Par. 8.3 (1).
Details of shaft extension are shown below:
• Without brake • With brake • Without Brake • With brake
Types USASEM-03A r--]2s, Types USASEM-03A 2SB, Types USASEM-03Ar--]2T, Types USASEM-03A[_-]2TB,
-05A[_]2S .05Ar-]2SB -05A':-]2T -05A[_]2TB
OILSEAL --_ °_ _ OIL SEAL
4o!
"_" 310118)
(7) Shaft Extension of Taper Shaft with Shaft Sea]
SERVOMOTOR proper is the same dimensions as stan-
dard SERVOMOTOR in S series. See Par. 8.3 (1).
I
Details of shaft extension are shown below.
• Without brake • Without brake • Without brake
Type USASEM-08A[-]IS Type USASEM-15A[_-]1S Type USASEM-30Ar-]IS
28
18(0.71)_(0.47) 36
20 (0.79) _4 (0.55)
18 (0.71)I 28 ( .1)11_2(0.47) 6(0.236_'- o.'_ (0.394)
3(0.118_ 10.3(0.41) _ _2.5
11(0.43_ -- 12(°47): H/NON-ROTA_.ION 6(0.23_ _ (0.49) 9
:j< =: _ $ 5
;02
OIL SEAL I \ i_,) _ _:
SB16307(NON') _ t _ _ I \ : _: SB22388 _ _ --
,_ \TAPERI"_0 . c_l TAPER1/10
_TAPER1/10 :_m i ( _' _ I
_ 15 0.197)
5(0.197)_ r --5(0.197) 5(0.197)':_/_ - 6(0.236)__-''_: 6 0236)
4.3(0.1691_ ' ) 5 8(0228_"r 6 6(0260: _-
-58-
To Next Page
Loading...
Need help?
General
