Need help?Do you have a question about the YASKAWA CIPR-GA50 Series and is the answer not in the manual?
General| Overload Capacity | 150% for 60 seconds |
|---|---|
| Enclosure | IP20 |
| Series | CIPR-GA50 |
| Output Voltage | 200-240V AC |
| kW Range | 0.4 kW |
| Control Method | Vector Control |
| Braking | Dynamic Braking |
| Communication | Modbus RTU |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit |
| Rated Output | 0.4-3.7 kW |
| Storage Temperature | -20°C |
| Vibration Resistance | 5.9 m/s² (0.6 G) |
Details steps for replacing a cooling fan using Procedure A, including safety advice.
Instructions for removing the fan finger guard and the cooling fan.
Steps to reverse the removal process and install a new cooling fan.
Steps for replacing a cooling fan using Procedure B, with associated safety warnings.
Guide for removing the fan finger guard and cooling fan for Procedure B.
Instructions for installing cooling fans as part of Procedure B.
To Next Page