5 Replace Cooling Fans
6 YASKAWA TOEP C730600 0GA Fan Replacement Procedure
■ Remove a Fan
1. To remove the fan finger guard from the drive, push the hooks on the left and right sides
of it and pull up.
A - Fan finger guard
Figure 5.1 Remove the Fan Finger Guard
2. Pull the cooling fan straight up from the drive. Disconnect the power supply connector
and remove the fan from the drive.
A - Cooling fan
Figure 5.2 Remove the Cooling Fan
■ Install a Fan
Reverse the removal procedure to install a cooling fan.
To Next Page
Loading...
