YASKAWA DX200 - 1.3.2 Special Training

1 Safety Information
1.3 Safety
6
165841-1CD
R-AN-A307
DX200 Notes for Safe
Operation
1.3.2 Special Training
MANDATORY
• Teaching maintenance of the robot must conform to:
– Industrial Safety and Health Law
– Enforcement Order of Industrial Safety and Health Law
– Ordinance of Industrial Safety and Health Law
– Other related laws are:
• Occupational Safety and Health Act in USA
– Factory Act (Gewerbeordnung) in Germany
– Health and Safety at Work, etc. Act in UK
– EC Machinery Directive 98/37/EC
• Prepare
– SAFETY WORK REGULATIONS
based on concrete policies for safety management complying with
related laws.
• Observe
– JIS B 8433-1:2007 (ISO 10218-1:2006)
– INDUSTRIAL ROBOT- SAFETY REQUIREMENTS
for safe operation of the robot. (Japan Only)
(JIS B 8433)
• Reinforce the
– SAFETY MANAGEMENT SYSTEM
by designating authorized workers and safety managers, as well as
giving continuing safety education.
• Teaching and maintaining the robot are specified as "Hazardous
Operations" in the Industrial Safety and Health Law (Japan only).
Workers employed in these above operations are requested to attend
special training offered by YASKAWA.
MANDATORY
• Persons who teach or inspect the manipulator must undergo
required training before using the manipulator.
• For more information on training, inquire at the nearest YASKAWA
branch office.
The telephone numbers are listed on the back cover of instructions.