YASKAWA GA800

3 Mechanical Installation
YASKAWA TOEPC71061779D GA800 Drive Installation Manual 11
Environment
Conditions
Vibration
• 10 Hz to 20 Hz: 1 G (9.8 m/s
2
, 32.15 ft/s
2
)
• 20 Hz to 55 Hz:
– 2004 to 2211, 4002 to 4168, T103 to T168: 0.6 G (5.9 m/s
2
, 19.36 ft/s
2
)
– 2257 to 2415, 4208 to 4720, 5289 to 5472, T208 to T720: 0.2 G (2.0 m/s
2
, 6.56 ft/s
2
)
Installation Orientation
Install the drive vertically for sufficient airflow to cool the drive.
NOTICE
Do not let unwanted objects, for example metal shavings or wire clippings, fall into the drive during drive
installation. Put a temporary cover over the drive during installation. Remove the temporary cover before start-up. Unwanted objects
inside of the drive can cause damage to the drive.
Note:
Do not put drive peripheral devices, transformers, or other electronics near the drive. Shield the drive from electrical interference if
components must be near the drive. The drive or the devices around the drive may malfunction due to electrical interference.
◆ IP55/UL Type 12 Heatsink External Mounting Drive and Cut-Out Dimensions and
Installation
Model Exterior and Mounting Dimension Diagram Panel Cut-Out Dimension Diagram Installation Procedure
2004 - 2082
4002 - 4060
Exterior and Mounting
Dimension Diagram 1
12
Panel Cut-Out
Dimension Diagram 1
18
Procedure A
24
2110
4075
Procedure B
24
2138
4089, 4103
T103
Exterior and Mounting
Dimension Diagram 2
13
Panel Cut-Out
Dimension Diagram 2
19
Procedure C
26
2169, 2211
4140, 4168
T140, T168
Exterior and Mounting
Dimension Diagram 3
14
Panel Cut-Out
Dimension Diagram 3
19
2257, 2313
4208 - 4302
T208 - T302
Exterior and Mounting
Dimension Diagram 4
15
Panel Cut-Out
Dimension Diagram 4
20
Procedure D
27
2360, 2415
4371, 4414
5289
T371, T414
Exterior and Mounting
Dimension Diagram 5
16
Panel Cut-Out
Dimension Diagram 5
20
4477 - 4720
5382 - 5472
T477 - T720
Exterior and Mounting
Dimension Diagram 6
17
Panel Cut-Out
Dimension Diagram 6
21 Procedure E
28