3 Mechanical Installation
YASKAWA TOEPC71061779D GA800 Drive Installation Manual 25
1. Remove the shipping attachment from the top of the drive.
A - Shipping attachment
Figure 3.16 Remove the Shipping Attachment
2. Remove the shipping attachment from the bottom of the drive.
A - Shipping attachment
Figure 3.17 Remove the Shipping Attachment
3. Install the drive in the cut opening of the enclosure panel and use screws to safety it to the enclosure panel.
Tighten the screws to a correct tightening torque:
• M6 screws: 3.92 N∙m to 4.90 N∙m (34.70 lbf∙in to 43.37 lbf∙in)
A - Enclosure panel
B - Gaskets
C - M6 screws
Figure 3.18 Install the Drive into the Opening of the Enclosure Panel
4. Use screws to safety the panel supports.
Tighten the screws to a correct tightening torque:
• M5 screws: 1.96 N∙m to 2.53 N∙m (17.35 lbf∙in to 22.39 lbf∙in)
To Next Page
Loading...
