YASKAWA GA800 - Page 38

4 Maintenance
38 YASKAWA TOEPC71061779D GA800 Drive Installation Manual
Fan Removal
1. To remove the fan finger guard from the drive, push the hooks on the left and right sides of it and pull up.
A - Fan finger guard
Figure 4.20 Remove the Fan Finger Guard
2. Pull the cooling fans straight up from the drive. Disconnect the relay connectors and remove the fans from the
drive.
A - Cooling fans
Figure 4.21 Remove the Cooling Fans
Fan Installation
Reverse the removal procedure for fan installation.
1. Connect the relay connectors between the drive and cooling fans.
Figure 4.22 Connect the Relay Connectors