YASKAWA GA800

4 Maintenance
48 YASKAWA TOEPC71061779D GA800 Drive Installation Manual
• 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
A - Circulation Fan
B - Fan unit base
C - Alignment pin on fan unit base
D - Circulation fan connector
Figure 4.45 Install the Circulation Fan
3. Safety the fan cable through the clamp.
A - Clamps
Figure 4.46 Safety the Fan Cable
4. Put the fan unit into the specified location and slide it to the left, then use screws to safety it to the drive.
Tighten the screws to a correct tightening torque:
• 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
Figure 4.47 Install the Fan Unit