YASKAWA iQpump1000 Setup Procedure

Technical Tip: iQPump1000 Setup Procedure for Use with Seametrics AG2000 Flow Meter
Product(s): iQpump1000
Doc. No. TN.iQp.04
TN.iQp.04 ©2016 - Yaskawa America, Inc.
Revision 1 - 2016-04 Page 1 of 10
SUMMARY
This Technical Tip provides an example set-up for a Yaskawa iQpump1000 drive and a
Seametrics AG2000 Flow Meter.
Features of this system example:
 Display flow rate
 Check for high or low flow rates and provide a digital output/alarm/fault
 Display accumulation of flow over time (volume)
 Provide a digital output/alarm/fault for high accumulation totals
 Provide constant pressure system
 Limit flow rate to 500 gallons per minute (GPM) to avoid pumping off the well
 Limit accumulation to 100,000 gallons per day (GPD)
Figure 1: Example System Overview

YASKAWA iQpump1000 Specifications

General

Brand	YASKAWA
Model	iQpump1000
Category	Controller
Language	English