5 Installation Procedure
YASKAWA TOEP C730600 97C LCD Keypad Installation Manual 19
Item
Part
Number
Notes
Extension cable
(1 m (3.3 ft.)) WV001
*1
Connects the keypad for remote
operation.
• RJ-45 8-pin straight through
• UTP CAT5e cable (1 m (3.3 ft.)/3 m
(9.8 ft.))
NOTICE
Damage to
Equipment. Do not use this cable to
connect the drive to a PC. Failure to
obey will cause damage to the PC.
Extension cable
(3 m (9.8 ft.))
WV003
*1
Installation support set A
(screw clamp)
900-192-
933-001
Encloses the keypad in the panel.
• M3 screws: 6 mm (0.24 in.) depth
Phillips recessed pan head machine
screws (2)
• M4 screws: 10 mm (0.39 in.) depth
Phillips truss head screws (4) (for
panel thickness of 1 to 1.6 mm (0.04
to 0.06 in.))
Installation support set B
(nut clamp)
900-192-
933-002
Encloses the keypad in the panel.
When there are weld studs on the interior
of the control panel, use the installation
support set B (nut clamp).
• M3 screws: 6 mm (0.24 in.) depth
Phillips recessed pan head machine
screws (2)
*1 Part numbers for the U.S.A. are UWR0051 and UWR0052. Contact Yaskawa
or your nearest sales representative for more information.
To Next Page
Loading...