5 Installation Procedure
26 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
2. Use the screws included in the support set as shown in
Figure 5.10 to attach the keypad to the installation
support.
A - Keypad
B - Installation
support set A
C - M3 screws
D - Screw mounting
hole
Figure 5.10 Mounting the Keypad to Installation Support Set A
3. Use the M4 screws included in the support set as shown
in Figure 5.11 to attach the installation support and
keypad to the enclosure panel.
Note:
Use a gasket between the control panel and the keypad in areas where
dust or other airborne unwanted materials could cause damage to the
drive.
To Next Page
Loading...