5 Installation Procedure
YASKAWA TOEP C730600 97C LCD Keypad Installation Manual 31
2. Use M3 screws (6 mm (0.24 in) depth cross-recessed pan
head screws) to attach the keypad from the inside as
shown in Figure 5.16.
A - Keypad
B - M3 screws
C - Enclosure panel
D - Screw mounting
holes
Figure 5.16 External/Face-Mount Installation
3. Use a slotted screwdriver to unlock the front cover of the
drive.
Use a slotted screwdriver with a tip width of 2.5 mm (0.1
in) or less and a thickness of 0.4 mm (0.02 in) or less.
To Next Page
Loading...