EasyManua.ls Logo

YASKAWA JVOP-KPLCA04A Series - Page 41

YASKAWA JVOP-KPLCA04A Series
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Installation Procedure
YASKAWA TOEP C730600 97C LCD Keypad Installation Manual 41
To replace the battery, use a Hitachi Maxell CR2016 Lithium
Manganese Dioxide Lithium Battery or an equivalent battery with
these properties:
Nominal voltage: 3 V
Operating temperature range: -20 °C to + 85°C (-4 °F to +185
°F)
WARNING
Fire Hazard. Do not disassemble batteries. Do not
expose batteries to heat or fire. If the battery explodes, it can cause a fire.
NOTICE
Damage to Equipment. The keypad battery stays in use
after you de-energize the drive. When you will keep the drive de-energized for
long periods of time, remove the battery from the keypad. When the expected
life of the battery is complete, replace the battery immediately. A dead battery
in the keypad can leak and cause damage to the keypad and drive.  
The performance life estimate of a new battery is:
Ambient temperature 20 °C (68 °F): 5 years
Ambient temperature -10 °C to +50 °C (14 °F to 122 °F): 3.5
years
1. De-energize the drive and remove the keypad.

Related product manuals