5 Installation Procedure
42 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
2. Use a slotted screwdriver or other tool to turn the battery
cover counterclockwise and remove the cover.
A - Battery cover
B - Opened
C - Closed
Figure 5.28 Remove the Battery Cover
3. Remove the used battery from the keypad.
4. Insert the new battery.
Note:
• The battery cover side is the positive pole. Make sure that the polarity is
correct when you put the battery in the keypad.
• Discard the used battery as specified by local regulations.
To Next Page
Loading...