• Do not attempt to use a SERVOPACK or Servomotor that is damaged or that
has missing parts.
• Install external emergency stop circuits that shut OFF the power supply and
stops operation immediately when an error occurs.
• Select the brake power supply for a
Servomotor with a Holding Brake accord-
ing to the power supply voltage and capacity required for the Servomotor
mod
el, as given in manuals and catalogs. Also confirm the input voltage to the
holding brake.
• Always install a surge absorber as a protect
ive device between the brake
power supply and Servomotor.
• The time required for a holding brake to operate depends on the types of pro-
tective devices. The time required for a holding brake to operate will also
chan
ge if holding brakes are connected in parallel. Always check the time
required for a holding brake to operate on the actual machine before you oper-
ate a Servomotor.
• Always use a Servomotor and SERVOPACK
in one of the specified combina-
tions.
• Do not touch a SERVOPACK or Servomotor with wet hands.
• Do not place an excessive load on the product during storage. (Follow all
instructions on the packages.)
E-4
Storage Precautions
There is a risk of damage to the Servomotor.
There is a risk of product failure.
There is a risk of injury or damage.
To Next Page
Loading...
