EasyManuals Logo

YASKAWA Varispeed f7 User Manual

YASKAWA Varispeed f7
463 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
User Constant Tables
5-61
* 1. When C6-01 = 0, the upper limit is 150.0.
* 2. When C6-01 = 1, the upper limit is 400.0.
* 3. When C6-01 = 0, -150.0 to +150.0.
* 4. When C6-01 = 1, -400.0 to +400.0.
Fault Restart: L5
User constants for restarting faults are shown in the following table.
L4-03
Speed
agreement
detection
level (+/-)
Effective when “Desired fre-
quency (speed) agree 2,”
“Frequency (FOUT) detec-
tion 3,” or “Frequency
(FOUT) detection 4" is set
for a multi-function output.
Frequency that should be
detected is set in Hz units.
-400.0
to
+400.0
*3
0.0 Hz No A A A A 49BH 6-54
-300.0
to
+300.0
*4
L4-04
Speed
agreement
detection
width (+/-)
Effective when “Frequency
(speed) agree 2,” “Desired
frequency (speed) agree 2,”
Frequency (FOUT) detection
3 or “Frequency detection 4"
is set for a multi-function
output.
Frequency detection width is
set in Hz units.
0.0 to
20.0
2.0 Hz No A A A A 49CH 6-54
L4-05
Operation
when fre-
quency ref-
erence is
missing
0: Stop (Operation follows
the frequency reference.)
1: Operation at 80% speed
continues. (At 80% of
speed before the
frequency reference was
lost)
Frequency reference is lost:
Frequency reference
dropped over 90% in 400
ms.
0 or 1 0 No A A A A 49DH 6-74
Con-
stant
Number
Name Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
MEMO
BUS
Regis-
ter
Page
V/f
V/f
with
PG
Open
Loop
Vec-
tor
Flux
Vec-
tor
L5-01
Number of
auto restart
attempts
Sets the number of auto
restart attempts.
Automatically restarts after a
fault and conducts a speed
search from the run fre-
quency.
0 to 10 0 No A A A A 49EH 6-75
L5-02
Auto restart
operation
selection
Sets whether a fault contact
output is activated during
fault restart.
0: Not output (Fault contact
is not activated.)
1: Output (Fault contact is
activated.)
0 or 1 0 No A A A A 49FH 6-75
Con-
stant
Number
Name Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
MEMO
BUS
Regis-
ter
Page
V/f
V/f
with
PG
Open
Loop
Vec-
tor
Flux
Vec-
tor

Table of Contents

Other manuals for YASKAWA Varispeed f7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YASKAWA Varispeed f7 and is the answer not in the manual?

YASKAWA Varispeed f7 Specifications

General IconGeneral
BrandYASKAWA
ModelVarispeed f7
CategoryInverter
LanguageEnglish

Related product manuals