EasyManuals Logo

Yealink EXP43 Administrator's Guide

Yealink EXP43
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #255 background imageLoading...
Page #255 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
252
Description
It enables or disables the minimum password strength limit.
Permitted
Values
0-Disabled
1-Enabled, when the Bluetooth device is paired with the phone, the minimum password strength can-
not be lower than 56bits.
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Web UI
Features > Bluetooth > High Security Pairing
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Handset/Headset/Speakerphone Mode
Yealink phones support three ways to place/answer a call: using the handset, using the headset or using the speak-
erphone. You can disable the infrequently used audio device as required.
Topic
Handset/Headset/Speakerphone Mode Configuration
Handset/Headset/Speakerphone Mode Configuration
The following table lists the parameters you can use to configure handset/headset/speakerphone mode.
Parameter
features.speaker_mode.enable <y0000000000xx>.cfg
Description
It enables or disables the phone’s speakerphone mode.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
features.handset_mode.enable <y0000000000xx>.cfg
Description
It enables or disables the phone’s handset mode.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
features.group_listen_in_talking_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to enter into the group listening mode by pressing the Speakerphone
key when you first answer the call using the handset.
Note: The audio is sent only through the handset. So you are able to speak and listen through the
handset, but you can only listen through the speaker.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
All phones except CP920

Table of Contents

Other manuals for Yealink EXP43

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink EXP43 and is the answer not in the manual?

Yealink EXP43 Specifications

General IconGeneral
Call waitingYes
Product colorBlack, Grey
Number of buttons23 buttons
Compatible productsT43U/T46U/T48U
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth124 mm
Width196.5 mm
Height137.5 mm
Weight5800 g
Package weight6400 g

Related product manuals