EasyManuals Logo

Yealink EXP43 Administrator's Guide

Yealink EXP43
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #462 background imageLoading...
Page #462 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
459
LED Status
Description
Fast-flashing red (200ms) The monitored user receives an incoming call.
Solid red
The monitored user is dialing.
The monitored user is talking.
Off The monitored user does not exist.
State Monitor for Intercom Contact Configuration
The following table lists the parameters you can use to configure state monitor for intercom contact.
Parameter
features.intercom.led.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display different intercom DSS key LED status/icons when the
status of monitored user changes.
Note: It works only if “features.intercom.subscribe.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Supported
Devices
All phones except T19(P) E2 and CP920
Default
0
Parameter
features.intercom.subscribe.enable <y0000000000xx>.cfg
Description
It enables or disables intercom subscription for the phones.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920
Outgoing Intercom Configuration
Yealink phones support two methods for initialing intercom calls.
The following table lists the parameters you can use to configure outgoing intercom.
Parameter
features.intercom.mode <y0000000000xx>.cfg
Description
It configures the intercom mode.
Permitted
Values
0-SIP
1-FAC, the feature access code is configured by “features.intercom.feature_access_code”.
Default
0
Parameter
features.intercom.feature_access_code <y0000000000xx>.cfg
Description
It configures the intercom feature access code.
Note: It works only if “features.intercom.mode is set to 1 (FAC).
Permitted
Values
String
Default
Blank
Parameter
account.X.call_info
[1]
<MAC>.cfg

Table of Contents

Other manuals for Yealink EXP43

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink EXP43 and is the answer not in the manual?

Yealink EXP43 Specifications

General IconGeneral
Call waitingYes
Product colorBlack, Grey
Number of buttons23 buttons
Compatible productsT43U/T46U/T48U
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth124 mm
Width196.5 mm
Height137.5 mm
Weight5800 g
Package weight6400 g

Related product manuals