Yealink EXP43 Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
451
parked against the monitored phone.
This value uses the same macro action string syntax as an Enhanced DSS key.
Example:
blf.enhanced.parked.talking.action = newcall
Note: It works only if “blf.enhanced.parked.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
blf.enhanced.parked.idle.action <y0000000000xx>.cfg
Description
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is idle and a call is
parked against the monitored phone.
This value uses the same macro action string syntax as an Enhanced DSS key.
Example:
blf.enhanced.parked.idle.action = newcall
Note: It works only if “blf.enhanced.parked.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
BLF Key LED/Icon and Behavior for Hold State Configuration
The following table lists the parameters you can use to configure BLF key LED/icon and Behavior for hold state (the
call on the monitored phone is placed on hold).
Parameter
blf.enhanced.hold.enable <y0000000000xx>.cfg
Description
It enables or disables the custom configuration when the call on the monitored phone is placed on
hold.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the custom BLF/BLF List DSS key LED status/icon colors.
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P, T29G, T19(P) E2 and CP920
Parameter
blf.enhanced.hold.led <y0000000000xx>.cfg
Description
It configures the custom BLF/BLF List DSS key LED status/icon colors when the call on the monitored
phone is placed on hold.
This value uses the same macro action string syntax as an Enhanced DSS key.
Example:
blf.enhanced.hold.led = $LEDg1000o$
For T57W/T48U/T48S phones, the BLF/BLF List DSS key field displays a green icon for 1000ms and
then turns to white.

Yealink EXP43 Specifications

General

Call waiting	Yes
Product color	Black, Grey
Number of buttons	23 buttons
Compatible products	T43U/T46U/T48U
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	124 mm
Width	196.5 mm
Height	137.5 mm
Weight	5800 g
Package weight	6400 g