How to update the firmware?How to update the firmware?
Yealink USB Connect can’t recognize deviceYealink USB Connect can’t recognize device ..
SettingsSettings
Change Default Outgoing Dialer DeviceChange Default Outgoing Dialer Device
Change Default Outgoing Dialer DeviceChange Default Outgoing Dialer Device
When multiple devices are connected to the phone, you can select the default outgoing dialer device.
1. Tap
on the idle screen.
2. Tap the desired connected device.
FAQFAQ
If you encounter a problem or can not complete an action, use Troubleshooting to identify and resolve the
problem.
Change Default Media Playback DeviceChange Default Media Playback Device
Change Default Media Playback DeviceChange Default Media Playback Device
When there are multiple devices connected to the phone, you can change the default music playback
device.
1. Tap
on the idle screen.
2. Tap the desired connected device.
NOTENOTE
It is only applicable to MP50.
NOTENOTE
It is only applicable to MP50.
To Next Page
