Yealink MP50 User Manual

1. install.
2. At the back of base station, there is an interface for you to connect busylight BLT 60. Please do not mess it up
with the power supplier interface though they are very similar. When the BLT60 light turns up, that means it is
connected correctly.
3. Stick to device.
LED IndicatorLED Indicator
The phone can use optional accessories when you need to extend your phone’s capabilities.
The Busylight BLT60 needs to be purchased separately if required for your phone:
Online StatusOnline Status (sync status requires softphone support)
LED IndicatorLED Indicator DescriptionDescription
Solid green Available
Solid orange Away
Solid red DND/Busy
Yealink MP50
User Guide
GoMomentum.com/support | 888.538.3960
8

Yealink MP50 Specifications

General

HDMI Output	No
Weight	0.8 kg
Microsoft Teams	Yes
Touch Screen	Yes
Supported Video Codecs	H.264
Supported Audio Codecs	G.722, G.711
Camera	No
Microphones	Built-in microphone
Speaker	Built-in speaker
Power over Ethernet (PoE)	Yes
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
USB Ports	1 x USB 2.0