Enterprise IP Phone Using the Basic Call Functions
To configure the Voicemail code via Phone interface:
1) Press MESSAGE button，scroll to Voice Mail, press Enter softkey.
2) Use the navigation keys to highlight the line for which you want to set, enter the
code which the phone uses to connect to your system. Press 123 softkey to choose
the proper input method.
3) Press Save to save the change, press Back to return to the previous menu.
Note:
Please contact your system administrator for the connecting code. Different systems
have different codes.
To retrieve the new voicemail via the Phone interface:
1) Press the Voicemail softkey directly.
2) You may be prompted to enter the password which is needed to connect to your
VoIP telephony system. It depends on your system.
3) Your voice mailbox is called and you are able to listen to your new and old
messages.
Note:
Before retrieving the new voicemail, please make sure that the connecting code has
been set on the phone.
SMS
You can retrieve the SMS in the same way as Voicemail.
To retrieve the SMS via Phone interface:
1) Press MESSAGE button, scroll to Text Message, press Enter softkey.
2) Use the navigation softkey to highlight the options. You can read the message in
the Inbox/ Sentbox/ Outbox/ Draftbox.
- 29 -
To Next Page
Loading...
