User Guide for the SIP-T29G IP Phone
92
6. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
7. (Optional.) Enter the corresponding value in the Value field.
8. (Optional.) Enter the corresponding value in the Extension field.
9. Press the Save soft key to accept the change or the Back soft key to cancel.
Line key is configurable via web user interface at the path Dsskey->Line Key.
Note
You can assign functionalities to 27 line keys. These 27 line keys are indicated on three pages.
When you assign functionality to line keys located in line key 1-10, the labels of line keys are
indicated on the first page. The following figure shows an example:
When you assign functionality to line key located in line key 11-27, the label of the line key
10-18 are indicated on the second page, and the labels of the line key 19-27 are indicated on
the third page. The line key in the right bottom is used to switch pages. The following figure
shows an example:
The following table lists the page icons:
Indicates the current page of line keys.
Indicates the non-current page of line keys.
When the phone is idle, you can also long press the line key to configure it directly on the phone.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
