Basic Call Features
119
- With the handset on-hook, enter the desired number using the keypad.
Press , , or the Send soft key.
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press to activate the headset mode.
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press , , or the Send soft key.
- With the optional headset connected, press to activate the headset mode.
Enter the desired number using the keypad.
Press , , or the Send soft key.
Note
The SIP-T29G IP phone can handle multiple calls at a time. However, only one active call (the call
that has audio associated with it) can be in progress at any time, other calls are placed on hold.
The SIP-T29G IP phone can handle a maximum of 50 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T29G IP phone. To place a new call during an
active call, do one of the following:
- Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press , , or the Send soft key.
- Press or the Hold soft key to place the original call on hold.
Press the New Call soft key.
Enter the desired number using the keypad.
Press , , or the Send soft key.
You can press or to switch between calls, and then press the Resume soft key to
retrieve the desired call.
Note
To permanently use the headset mode, refer to Headset Prior on page 84.
If multiple accounts are registered on the phone, you can first press the desired line key on the
idle screen or press the Line soft key on the dialing screen, and then you can use the selected
account to place a call.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
