Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone
134
3. Enter the numbers in the DND Authorized Numbers field.
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When DND is enabled on the phone, the phone can still receive incoming calls from the numbers
specified in the DND Authorized Numbers field.
Note
To disable DND in phone mode:
1. Press the DND soft key when the phone is idle.
To disable DND in custom mode:
1. Press the DND soft key when the phone is idle.
2. Press or to select the desired account and then press the Enter soft key.
3. Press or , or the Switch soft key to select Disabled from the DND Status field.
4. Press the Save soft key to accept the change.
If you want to disable DND for all accounts, you can press the All Off soft key.
DND authorized number is configurable via web user interface only.
When the phone misses a call, a prompt window will pop up by default. If you want to disable the
feature, contact your system administrator for more information.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm