Yealink SIP-T29G User Manual

Basic Call Features
133
If you enable DND for the default account, the associated line icon will change to , and the
icon will appear on the status bar.
If you enable DND for the non-default account, only the associated line icon will change
to .
If you enable DND for all accounts, all line icons will change to and the icon will
appear on the status bar.
Note
To configure the DND authorized numbers via web user interface:
1. Click on Features->Forward&DND.
2. Select Enabled from the pull-down list of DND Emergency.
When DND and busy forward are both enabled for a specific account, calls to the specific account
will be sent to the configured destination number. For more information on call forward, refer to
Call Forward on page 134.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm