User Guide for the SIP-T29G IP Phone
162
4. Press or , or the Switch soft key to select the desired line from the Account ID
field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. Enter the phone number or extension you want to monitor in the Value field.
7. (Optional.) Enter the directed call pickup code in the Extension field.
If it is configured, when the monitored user receives an incoming call, the supervisor can
press the BLF key to pick up the call directly.
8. Press the Save soft key to accept the change or the Back soft key to cancel.
BLF key is configurable via web user interface at the path Dsskey->Line key.
Configuring Visual and Audio Alert for BLF pickup
You can enable visual alert feature for BLF pickup on the phone. This allows the LCD screen of
the monitoring phone to display the caller ID when the monitored line receives an incoming call.
You can also enable audio alert feature for BLF pickup on the phone. If both of them are enabled,
the monitoring phone will play a specific ring tone (refer to BLF Ring Type) when the monitored
line receives an incoming call.
To enable visual and audio alert features via web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Visual Alert for BLF Pickup.
3. Select Enabled from the pull-down list of Audio Alert for BLF Pickup.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
