EasyManuals Logo

Yealink SIP-T29G User Manual

Yealink SIP-T29G
239 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #175 background imageLoading...
Page #175 background image
Advanced Phone Features
163
4. Click Confirm to accept the change.
Note
When the monitored line receives an incoming call, the following occurs on your phone:
The phone plays a specific ring tone (if enabled).
The BLF key LED flashes red.
The caller ID appears on the LCD screen (if enabled).
In the following figure, the LCD screen shows an incoming call from 1008 on the monitored line.
You can do the following actions:
- Press the DPickup soft key to pick up the call.
- Press the Send soft key to dial out the monitored phone number.
- Press the New Call soft key to place a new call.
- Press the Cancel soft key to exit the screen.
Note
Configuring Directed Call Pickup Code
If you configure the directed call pickup code in advanced, you can pick up the monitored user’s
incoming call by pressing the BLF key. You can configure the directed call pickup code when
configuring a BLF key. For more information, refer to Configuring a BLF Key on page 161. You
can also configure the directed call pickup code on a global or per-line basis via web user
interface.
If your phone is locked and the type of the phone lock is configured as Function Keys or All
Keys, you cannot use the DPickup, Send, New Call and Cancel soft keys until unlocked. For
more information, refer to Phone Lock on page 54.
Visual and audio alert features are configurable via web user interface only.

Table of Contents

Other manuals for Yealink SIP-T29G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T29G and is the answer not in the manual?

Yealink SIP-T29G Specifications

General IconGeneral
SpeakerphoneYes
Voice codecsG.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Lines quantity10 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Display diagonal4.3 \
Display resolution480 x 272 pixels
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Power over Ethernet (PoE)-
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Volume controlButtons
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm

Related product manuals