Yealink SIP-T29G User Manual

Customizing Your Phone
87
Activating the Bluetooth Mode
When you insert Bluetooth USB dongle BT40 into the USB port at the back of the IP phone, the
LCD screen prompts “Adapter has been added, scanning the bluetooth devices right now?”. You
can press the OK soft key to enter the Bluetooth screen. You can activate Bluetooth mode and
then scan Bluetooth devices.
To activate the Bluetooth mode via phone user interface:
1. Press Menu->Basic->Bluetooth.
2. Press or , or the Switch soft key to select On from the Bluetooth field.
3. Press the Save soft key to accept the change.
The LCD screen displays the Bluetooth icon .
Bluetooth mode is configurable via web user interface at the path Features->Bluetooth.
Pairing and Connecting the Bluetooth Headset
Before you pair a Bluetooth headset, check the indicator on the Bluetooth headset to make sure
that the Bluetooth headset is discoverable. For more information, refer to the documentation
from the Bluetooth headset manufacturer.
To pair and connect your Bluetooth headset to your IP phone:
1. Press Menu->Basic->Bluetooth.
2. Press the Scan soft key to search the Bluetooth devices.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm