Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone
88
The LCD screen prompts the following message:
The phone proceeds to scan the local Bluetooth devices. When the phone completes
scanning, it will display the available Bluetooth devices on the LCD screen.
3. Select the desired Bluetooth headset and then press Connect soft key.
4. Enter the desired PIN in the Password field.
The default PIN is “0000”.
5. Press the OK soft key.
The Bluetooth headset is then automatically connected to your IP phone.
The Bluetooth icon appears on the LCD screen.
With the Bluetooth headset paired and connected, you can use the Bluetooth headset to place
and answer calls. For more information, refer to the documentation from the Bluetooth headset
manufacturer.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm