Using Your Phone
57
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.
To configure an Intercom/PTT key via CommPortal phone configurator:
1. Click on Programmable Keys - Line Key->Key X.
2. Select Intercom/PTT from the Soft key action field.
3. Select the desired line to apply this feature from the Line field.
4. Enter the target extension number in the Number field.
5. Enter the string that will appear on the LCD screen in the Label field.
6. Click Save changes to accept the change.
7. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.
The phone automatically plays a warning tone when it receives an incoming intercom
call. In addition, you can enable the phone to mute the microphone when it
automatically answers an incoming intercom call. You can also enable the phone to
automatically answer an incoming intercom call while there is already an active call on
the phone. The active call is then placed on hold.
Enable or disable the IP phone to
automatically answer an incoming intercom
call while there is already an active call on the
phone.