EasyManuals Logo

Yealink SIP-T41P Configuration Guide

Yealink SIP-T41P
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
Yealink IP Phones Configuring Guide
58
Accept Intercom
You can enable or disable the phone to automatically answer an incoming intercom call.
If Accept Intercom is enabled, the phone will automatically answer an incoming
intercom call. If Accept Intercom is disabled, the phone will reject incoming intercom
calls and send a busy message to the caller. Accept Intercom is enabled by default.
Note
Intercom Mute
You can mute or un-mute the phone’s microphone for intercom calls automatically. If
Intercom Mute is enabled, the microphone will be muted for intercom calls. If Intercom
Mute is disabled, the microphone will work for intercom calls. Intercom Mute is disabled
by default.
Intercom Tone
You can enable or disable the phone to play a warning tone when receiving an
intercom call. If Intercom Tone is enabled, the phone will play a warning tone before
answering the intercom call. If Intercom Tone is disabled, the phone will automatically
answer the intercom call without warning. Intercom Tone is enabled by default.
Intercom Barge
You can enable or disable the phone to automatically answer an incoming intercom call
while there is already an active call on the phone. If Intercom Barge is enabled, the
phone will automatically answer the intercom call and place the active call on hold. If
Intercom Barge is disabled, the phone will handle an incoming intercom call like a
waiting call. Intercom Barge is disabled by default.
To configure intercom feature via CommPortal phone configurator:
1. Click on Features-> Intercom.
2. Mark the desired radio box in the Accept Intercom field.
3. Mark the desired radio box in the Intercom Mute field.
4. Mark the desired radio box in the Intercom Tone field.
Your administrator can set a period of delay time before the phone automatically
answers intercom calls. Contact your system administrator for more information.

Other manuals for Yealink SIP-T41P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41P and is the answer not in the manual?

Yealink SIP-T41P Specifications

General IconGeneral
Power requirementsAC 100-240V, DC 5V
Power over Ethernet (PoE)Yes
Touchscreen-
Display diagonal2.7 \
Display resolution192 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Voice codecsG.711, G.723, G.726, G.729A, G.729B
BluetoothNo
Ethernet LAN (RJ-45) ports2
Storage temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm

Related product manuals