User Guide SIP-T46G IP Phone
98
z URL Record: The phone sends HTTP URL request to trigger a recording. Contact your
system administrator for the predefined URL.
Note
To configure a Record key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Record from the Key Type field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a URL Record key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select URL Record from the Type field.
4. Enter the URL (e.g. http://10.1.2.224/phonerecording.cgi)in the URL Record filed.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure the Record or URL Record keys via web user interface at the
path DSS Key.
The Record/URL Record keys control the recording and are available:
z During an active call
z When calls are on hold or mute
z During a blind or attended transfer
z During a conference call
z When the phone prompts you to answer an incoming call
The Record/ URL Record keys are not available:
z When there are no connected calls on your phone
The record feature is not available on all servers. Contact your system administrator for
more information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
