User Guide SIP-T46G IP Phone
16
Automatic Phone Initialization
The phone finishes the initialization process by loading the saved configuration. The
phone LCD screen will display "Initializing…Please wait" during the initialization.
DHCP (Dynamic Host Configuration Protocol)
By default the phone attempts to contact a DHCP server in your network in order to
obtain its valid network settings, e.g. IP address, subnet mask, default gateway, DNS
server.
Note
Phone Status
You can view the system status of your phone via phone user interface or web user
interface.
Available information of phone status includes:
z Network status including WAN port and LAN port information.
z Phone status including device model, firmware version and MAC address.
z Account status indicating the register status of sip accounts.
To view the phone status via phone user interface:
1. Press , or press Menu->Status.
2. Press or to scroll through the list and view the specific
information.
To view the phone status via web user interface:
1. Open the web browser of your computer.
2. Enter the IP address in the browser’s address bar, and then click Enter.
3. Enter the User Name (admin) and Password (admin) in the pop-up dialogue box.
4. Click OK to login.
If your network does not use DHCP, proceed to Basic Network Settings on page17.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
