Advanced Phone Features
97
The shared line key LED illuminates flashing when the shared line call is placed on public
hold. For more Shared Line key LED indications, refer to LED Instructions on page 5.
To place the call on private hold, you should configure a private hold key in advance:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Private Hold from the Key Type
field.
5. Press the Save soft key to accept the change.
You can also configure a private hold key via web user interface at the path DSS Key.
To place a call on private hold:
1. Press the private hold key when there is an active call on the shared line.
Note
To barge in a shared line call:
1. Press the shared line key on any other phone when there is an active call on the
shared line.
For more shared line key LED instructions, refer to LED Instructions on page 5.
Call Recording
You can record calls by pressing a record key on the SIP-T46G IP phone. There are 2
different ways of configuring call recording and they even work differently:
z Record: The phone sends SIP INFO message containing a specific header to trigger
a recording.
The private held call can be only retrieved by the hold party.
If the call is placed on private hold, and you attempt to pick up the call by pressing the
shared line key, the retrieve will fail and the LCD screen will prompt “Forbidden”.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
