Yealink SIP-T46G Guide

Basic Call Features
83
3. Press or , or the Switch soft key to select Enable from the Call Waiting Tone
field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure the call waiting feature via web user interface at the path
Phone->Features->General Information.
Conference
You can create a conference with other parties using the phone’s local conference
feature. You can create a conference between an active call and a call on hold (on
the same or another line) by pressing the Conf soft key. The network conference feature
allows you to add and remove specific conference parties.
Note
Local Conference
The SIP-T46G IP phone supports up to 3 parties (including yourself) in a conference call.
This is called Local Conference and is the default method of conference.
To set up a local conference call:
1. Place a call to the first party.
2. Press the Conf soft key to create a new call
The active call is placed on hold.
The network conference feature is not available on all servers. For more information,
contact your system administrator.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm